Filament PVA Nature 0.5kg
- This is a material that acts as a support and it dissolves in water. It takes about 75 minutes at 23℃
Specifications
Filament Type PVA
Diameter 1.75mm
Printing temperature 190~220℃
Printing speed 60~90mm/s
Layer height 0.2mm
Bed temperature Not Required
Raft Not Required
Weight 0.5Kg
Density 1.25±0.05g/cm3
MFR(190℃，2.16Kg) 2~4g/10min
Water absorption（equilibrium in water，23℃） ——
Tensile Strength ≧10MPa
Flexural strength ≧15MPa
Tensile modulus ≧190MPa
Izod notched impact strength(IZOD,23℃) ≧16J/m (ASTM D256)
Elongation @ Break ≧11.0%
Heat Distortion Temperature ≧55℃
Diameter tolerance ±0.08mm
Roundness deviation ≦0.08mm
Color netural
6970152950727EAN:
